Geovision GV-3D Manual de usuario

Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.User's Manual V

4 1.5 Overview This section identifies the components of the GV-3D People Counter. 1.5.1 Front View 123 45 Figure 1-2 No. Name Function 1

Introduction 1 1.5.2 Rear View Figure 1-3 No. Name Function 1 Ethernet Connect to an Ethernet. 2 SPDIF Reserved (not functional). 3

6 1.6 The IR Remote Control Figure 1-4 No. Name Function 1 Reboot Reboot the device. 2 Number / Alphabets / Punctuation Marks Enter the n

Introduction 71 Press Shift and 0~7 to switch to one of the 8 resolutions below. Shift + 0 : VGA_640 x 480 Shift + 1 : VGA_1024 x 768 Shift +

8 Chapter 2 Getting Started 2.1 Connecting the Device The instructions below describe the connection required to operate GV-3D People Counter. N

Getting Started 2 1. Connect a display device to VGA video connector or HDMI connector for video and audio alarm combined outputs. 2. Connect to a s

10 2.3 Installing Wall Mount (Optional) You can separately purchase the Wall Mount Kit to mount GV-3D People Counter on a wall. 1. Unscrew the 4

Getting Started 2 2.4 Installing VESA Monitor Mount (Optional) You can separately purchase the VESA Monitor Mount for installing GV-3D People Counter

12 2.5 Installing In-Ceiling Mount (Optional) You can separately purchase the in-ceiling mount to mount Asus Xtion Pro / Asus Xtion Pro Live on

Getting Started 2 3. Unscrew the screws on two ends of the Asus Xtion Pro / Asus Xtion Pro Live. Figure 2-9 4. Insert the 2 black screws into the s

© 2013 GeoVision, Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without t

14 6. Insert the Asus Xtion Pro / Asus Xtion Pro Live into the hole in the ceiling board. Make sure the black plastic clips are pointing verticall

Getting Started 152 9. Put the magnets provided in the rectangular indentations on the cover for in-ceiling mount. Figure 2-15 10. Place the cover

16 Chapter 3 The OSD Menu After connecting the devices, turn the power switch on the GV-3D People Counter to ON and the window below appears.

The OSD Menu 3 3.1 Setting the Network Under the Network tab, you can configure the IP address of the GV-3D People Counter. If installed in a LAN wit

18 3.2 Setting the GV-3D People Counter Under the Info tab, you can set up the login ID, password, device name, video output type and resolution

The OSD Menu 193 Note: 1. By default, the video output is set to VGA with 1024 x 768 resolutions. 2. You need to allocate at least 50 MB in the

20 Chapter 4 The Web Interface After installing the GV-3D People Counter on the network, you can access GV-Web Report Lite to set up the Asus Xtio

The Web Interface 44.2 Setting the GV-3D People Counter Once you have logged in to the GV-Web Report Lite, click the Setup tab on the top to see th

22 4.2.1 General Settings Under the live view, the following setting tabs are available: User, DDNS, SMTP, Export, SCH, IP, SD, FW, Time and MEM.

The Web Interface 4[SMTP] You can receive a daily report of the counting results by e-mail. First, set up your mail server on this page and then go to

Contents Contents ...

24 After you have completed the Export settings, you shall receive the report in a zip file at the appointed time. The report within is as the figu

The Web Interface 4[SD] You can see the size of the inserted SD card, size of space used by current database and size of free space. To clear the cont

26 [MEM] By default, the counting result on the monitor is reset to zero at 12:00 midnight everyday. To set a different reset time, use the Count

The Web Interface 44.2.2 People Counter Settings For more precise counting results, specify the height of the Asus Xtion Pro / Asus Xtion Pro Live

28 4.2.3 Report to Other Servers You can send People Counting data to up to three other GV-Web Report Lite server and / or GV-Web Report for dat

The Web Interface 44.3 Accessing People Counting Data After setting up the GV-3D People Counter to start collecting data, you can access the people

30 The tables on the main page show the following information for each GV-3D People Counter.  In: The number of people entered on that day since

The Web Interface 44.3.2 Group On the Group page, you can group the connected GV-3D People Counter, and see the people counts of the set group. You c

32 8. To organize multiple groups into subgroups, click Setting Group Relations in the left menu. Drag and drop a group under another group to mak

The Web Interface 44.3.3 Log On the Log page, you can look up the people counts per hour of a specified time period from the selected GV-3D People Co

5.3 Creating a Screen Layout ...39 5.4 Exporting the Screen La

34 4.3.4 Query The Query page provides you with the daily, weekly, monthly and yearly people counting graphs and tables. To search the counting

The Web Interface 4The following figure is an example of the In/Out Counts per hour and Total Stay option. The value 12, 15 indicates the count of rem

36 The following figure is an example of the In Percentage per day option. The value 2012-12-20 (Thu), 29 (26.85%) indicates the total number of en

Content Designer 5Chapter 5 Content Designer Using the Content Designer, you can customize the screen layout for display monitor to show the in count

38 5.2 Installing the Content Designer Follow the steps below to install the Content Designer: 1. Insert the Software CD to your computer. It ru

Content Designer 55.3 Creating a Screen Layout 1. To create a project, click File on the menu bar and select New Scenario. 2. Select GV-3D People Co

40 Note: The In Count, Out Count, Stay Count and Current Time will be shown on the display monitor as numbers only. If you wish to label the counti

Content Designer 4155.4 Exporting the Screen Layout to GV-3D People Counter 1. To preview the created screen layout, click Preview on the main

42 Chapter 6 GV-IP Device Utility GV-IP Device Utility can detect GV-3D People Counter in the LAN and allows you to quickly set the IP address o

GV-IP Device Utility 66.2 Setting the GV-3D People Counter 1. To start the GV-IP Device Utility, go to Windows Start, point to Programs and select

iiiFirmware and Software Compatibility The Asus Xtion Pro / Asus Xtion

44 3. Click the different tabs to access the following settings:  Set IP Address: Type the IP address, subnet mask, default gateway and DNS ser

Specifications Specifications GV-3D People Counter HDMI 480p, 720p, 1080i, 1080p Video Output VGA 640 x 480, 1024 x 768, 1280 x 768, 1366 x 768 Audi

46 Asus Xtion Pro / Asus Xtion Pro Live Max. Power Consumption 2.5 W Operating Distance 0.6 – 5 m (1.97 – 16.40 in) Operating Environment Indoor Op

Appendix Appendix Optimal Installation To increase the accuracy of people counting results, be sure to install the Asus Xtion Pro / Asus Xtion Pro L

48 Detection Limitations There are situations that may cause GV-3D People Counter to falsely detect the number of people. Below are examples of sit

Appendix Actual: 2 Counted: 1 Head to head Actual: 2 Counted: 2 One hand on shoulder Actual: 4 Counted: 4 Multiple people Carrying a large b

50 Pushing a cart: Actual: 1 Counted: 1 Cart close to the person’s body. Actual: 1 Counted: 2 Cart away from the person’s body. Tip: Se

Introduction 1 Chapter 1 Introduction The GV-3D People Counter integrates Asus Xtion Pro / Asus Xtion Pro Live to count and analyze the numbe

2 1.1 Features  Counts the number of people (In and Out)  Support for HDMI and VGA compatible monitors  IR remote control to configure on-sc

Introduction 1 1.4 Options Optional devices can be purchased separately for GV-3D People Counter. Contact your dealer for more information.