Geovision GV-3D Manual de usuario descargar pdf (Pagina 15)

Getting Started

1. Connect a display device to VGA video connector or HDMI connector for video and audio

alarm combined outputs.

2. Connect to a standard network cable.

3. If you use a VGA monitor, connect a speaker to L/R port for audio alarm.

4. Insert an SD card.

5. Connect the Asus Xtion Pro / Asus Xtion Pro Live to the USB port of the GV-3D People

Counter. The recommended installation height for Asus Xtion Pro / Asus Xtion Pro Live is

between 1.8 – 5 meters.

6. Connect to power using the supplied power adapter.

7. Switch the Power button to ON.

2.2 Restoring to Factory Default Settings

If you need to restore the GV-3D People Counter to factory default settings, follow the steps

below:

1. Press and hold the Default button on the front panel.

Figure 2-2

2. Release the Default button when the green LED stops blinking. The GV-3D People

Counter will automatically reboot after loading default.

Note: The power should always be on during the process of loading default.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

Sin comentarios

Geovision GV-3D Manual de usuario Pagina 15