Geovision GV‐SNVR0400F Manual de usuario descargar pdf (Pagina 16)

3. Place the hard drive in the drive drawer as below by aligning the three holes.





Figure 2-3

4. Secure the hard drive with the drive drawer using the supplied 6 screws (3 screws on

each side).

Figure 2-4

5. Connect the SATA Power Cable and Data Cable to the hard drive.

Figure 2-5

6. Put the drive drawer back in the device and secure the two screws on the drive drawer

(Figure 2-2).

7. Assemble the cover with the device by tightening the screws on rear panel (Figure 2-2).

The hard drive is now ready to use.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 62 63

Sin comentarios

Geovision GV‐SNVR0400F Manual de usuario Pagina 16