Geovision GV‐SNVR0400F Manual de usuario descargar pdf (Pagina 21)

Getting Started

2.3 Initial Configuration

After you have installed the IP cameras under the same LAN with the GV-SNVR, you are

ready to display the channels on GV-SNVR.

2.3.1 Automatically setting up GV-IP Camera

To automatically set up the IP cameras, follow the steps below.

1. Power on the GV-SNVR. It automatically searches and lists the IP cameras under the

same LAN.

2. You are prompted with a dialog box asking if you want to automatically assign IP address.

The automatic assignment will only apply on the cameras with IP address 192.168.0.10.

Figure 2-13

3. Click Apply. The GV-SNVR assigns unused IP addresses to the cameras in an

ascending numerical order and enables the connection.

Figure 2-14

Upon successful connection, the status displays “Connected”, with the resolution and

bandwidth being displayed in the correspondent columns. When you close the Camera page,

you can access the live view.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 62 63

Sin comentarios

Geovision GV‐SNVR0400F Manual de usuario Pagina 21