Geovision GV-R1352 Guía de instalación descargar pdf (Pagina 6)

2.2.1 Defining Readers on GV-AS Controller Web Interface

Since multiple readers can connect to GV-AS Controller using one RS-485 interface, you

need to specify which door each reader controls. This section explains how to define readers

on the Web interface of GV-AS Controller. On the Web interface, you can also set the reader

to read the GID or UID on GV-AS ID Cards / Key Fobs. Note that the Web interface of

different GV-AS Controller models varies.

1. On the controller’s Web interface, click Extended Reader. This dialog box appears.

2. In the GV-Reader/CR420/GF1921/GF1922 section, select the RS485 checkbox in front of

the ID number and type the Serial Number on the rear panel of the reader. The ID

number will be assigned to the reader.

February 6, 2015

3. Select a door/gate for the reader from the Function drop-down list.

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

Sin comentarios

Geovision GV-R1352 Guía de instalación Pagina 6